Datasheet
XGS-6350-48X2Q4C
1
Powerful 100Gbps Solution for All Long-Reach Networks
PLANET XGS-6350-48X2Q4C is a High-performance Layer 3 Managed Switch that
meets the next-generation Metro, Data Center, Campus and Enterprise network
requirements. It has high-density 48 10G SFP+, 2 40G QSFP+ and 4 40G/100GbE
QSFP28 ber interfaces delivered in a 1RU rugged case.
The administrator can flexibly choose the suitable transceivers according to
the transmission distance or the transmission speed required to extend the
1G/10G/40G/100G network efficiently. Besides, with 1.92Tbps switching capacity,
the XGS-6350-48X2Q4C can handle extremely large amounts of data in a secure
topology linking to backbone or high capacity servers where audio, video streaming
and multicast applications are utilized.
Layer 3 48-Port 10G SFP+ + 2-Port 40G QSFP+ + 4-Port 100G
QSFP28 Managed Switch
Physical Ports
• 48 10GBASE-SR/LR SFP+ slots, compatible with
1000BASE-SX/LX/BX SFP
• 2 QSFP+ slots with each supporting 40G and 4 x 10
Gigabit Ethernet modes
• 4 QSFP28 slots with each supporting native 100 Gigabit
Ethernet, 40G and 4 x 10 Gigabit Ethernet modes
• RJ45 to DB9 console interface for switch basic
management and setup
• MNG port for HTTP server access
• USB port
IPv4 Features
• Static Routing, RIP v1/v2, OSPF and BGP
• Policy Routing
• BFD for OSPF and BGP
IPv6 Features
• ICMPv6, DHCPv6, ACLv6,IPv6 Telnet
• IPv6 Neighbor Discovery
• Path MTU Discovery
• MLD and MLD Snooping
• IPv6 Static Routing, RIPng, OSPFv3 and BGP4+
• Manual Tunnel, ISATAP Tunnel and 6-to-4 Tunnel
Multicast Routing Features
• Supports Multicast Routing Protocols:
– PIM-DM (Protocol Independent Multicast - Dense Mode)
– PIM-SM (Protocol Independent Multicast - Sparse Mode)
– PIM-SSM (Protocol Independent Multicast - Source-
Specic Multicast Mode)
• Supports IGMP v1/v2/v3
Layer 2 Features
• Supports VLAN
– IEEE 802.1Q tag-based VLAN
– Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad)
supported
– GVRP for dynamic VLAN management
– Private VLAN
• Supports Link Aggregation
– 802.3ad Link Aggregation Control Protocol (LACP)
Extractive Power Supply Design to Increase Flexibilty
The XGS-6350-48X2Q4C is equipped with one extractive 100~240V AC power
supply unit, so it is easy to replace the power for users. Besides, the XGS-6350-
48X2Q4C reserves another backup power slot on the rear panel where the
second AC or DC power can be added to make it a redundant power supply. The
redundant power system is specifically designed to handle the demands of high-
tech facilities requiring the highest power integrity.
24 x 10G SFP+ 24 x 10G SFP+
2 x 40G QSFP+
4 x 40/100G QSFP28