User Manual
521
Users Manual of XGS-6350-24X4C
parameters of RIPng, the network usage information and the real communication-tracing information. This
kind of information can help users to judge the usage of network resources and solve network problems. From
the statistics information, you can also know the reachablity of a network node.
To display all kinds of statistics information, run the following commands in EXEC mode:
Command Purpose
show ipv6 rip instance-name
summary
Displays the total routing information
about a RIPng instance.
show ipv6 rip instance-name database
Displays all routes of a RIPng instance.
show ipv6 rip instance-name interface
Displays all interfaces that a RIPng
instance covers.
To trace the information about the routing protocols, run the following commands in EXEC mode:
Command Purpose
debug ipv6 rip instance-name database
Traces that a route of a RIPng instance
is added to removed from or changed
in a routing table.
debug ipv6 rip instance-name event
Traces the abnormity that occurs in the
running of a RIPng instance and the
whole process of redistributing a RIPng
instance.
debug ipv6 rip instance-name send
Traces the process that a RIPng
instance transmits packets.
debug ipv6 rip instance-name recv
Traces the process that a RIPng
instance receives packets.
debug ipv6 rip instance-name msg
Traces the important events that lead to
the termination of the startup of a
RIPng instance.
debug ipv6 rip instance-name all
Traces all the information about a
RIPng instance.
53.1.4 RIPng Configuration Example
This section shows some RIPng configuration example:
Connect device A and device B directly and make the following settings:
Device A:
interface VLAN2
no ip address
no ip directed-broadcast
ipv6 address 4444: : 4444/64
ipv6 enable
ipv6 rip dang2 enable