User Manual

475
Users Manual of XGS-6350-24X4C
49.1.3.2 Enabling Backup Interface Rejection
Set delaying of enabled and disabled backup interface .To realize time gap between primary interface state
changing and the result of state of backup interface changing.
1. choose backup interface
2. enabled interface backup delaying in this interface .
choose backup interface,You can use instructions as follows in interface configuration mode.
Command Purpose
Backup interfaceslot/port
Choose backup interface of this port.
Enabled interface backup delaying , You can use instructions as follows in interface configuration mode.
Command Purpose
backup delay {enable-delay | never }
{disable-delay | never }
Difine backup interface activation and
deactivation delaying.
49.1.3.3 Enabling Flux Equlization Backup
Flux equlization backup function will work if real flux of primary interface pass the percentage limit, backup
interface will be activated to work state. If real flux of primary interface and backup interface is less than
percentage limit to primary band width , backup interface will be activated to backup state.
Enabled flux equalization backup, you should execute tasks as follows:
 choosing the backup interface
 enabling flux equalization of this interface
49.1.3.3.1 Choosing backup interface.
You can use instructions as follows in interface configuration mode.
Command Purpose
Backup interfaceslot/port
Choose backup interface of this interface
49.1.3.3.2 Enabling flux equalization of this interface.
You can use instructions as follows in interface configuration mode.
Command Purpose
Backup load
[enable-threshold|never][disable-thresh
old|never]
Configure interface backup flux to
activate or deactivate backup interface
limit.
49.1.4 Examples of Port Backup Configuration
Enable the backup interface on serial interface 1/0,and choose serial interface 1/1 as his backup interface.