User Manual

269
Users Manual of XGS-6350-24X4C
Figure 15: Ring recovery
Of course, if the transit node in Preforwarding state does not receive the RING-UP-FLUSH-FDB packet and
Fail Time also exceeds, the transit node will open the blocked transit port and resume data communication.
27.3.3 MEAPS configuration
27.3.3.1 Configuration Example
MEAPS configuration
As shown in figure 2.1, master node S1 and transit node S2 are configured as follows. As to the settings of
other nodes, they are the same as S2's settings.
Configuring switch S1:
The following commands are used to set the sub-ring transit node, node 2:
Switch_config#mether-ring 2 domain 1
Switch_config_ring2#transit-node