User Manual

235
Users Manual of XGS-6350-24X4C
Switch_config_g0/1# switchport backup interface preempt delay 15
Make the following settings to enable the TCN packets to be transmitted:
Switch_config_g0/1# switchport backup interface tcn transmit
Switch_config_g0/1# interface g0/2
Switch_config_g0/2# switchport backup interface tcn transmit
Switch_config_g0/2# exit
Browse the state of the port:
Switch_config# show backup interfaces
Backup interface pairs:
Active
Backup
State Preemption
G0/1 G0/2 Active Up/Backup Down Role/15/0
Make the following settings to enable the TCN packets to be received:
Switch# config
Switch_config# interface range g0/10 , 11
Switch_config_if_range# switchport backup interface tcn accept
Switch_config_if_range# exit
Switch_config#