User Manual

230
Users Manual of XGS-6350-24X4C
system-capabilities
system-description
system-name
no lldptlv-selecttlv-type
Tlvs or tlv-types which needs to be deleted
include:
macphy-confg
management-address
port-description
port-vlan
system-capabilities
system-description
system-name
23.1.3.6 Configuring the Transmission or Reception Mode
LLDP can work under three modes: transmit-only, receive-only and transmit-and-receive.
By default, LLDP works under the transmit-and-receive mode. You can modify the working mode of LLDP
through the following commands.
Run the following command in interface configuration mode to configure the working mode of LLDP:
Command Purpose
［no］lldptransmit Sets the port to the transmit-only mode
or disables the transmit-only mode of
the port.
［no］lldpreceive Sets the port to the receive-only mode
or disables the receive-only mode of
the port.
23.1.3.7 Configuring Show-Relative Commands
You can observe the information about the neighbor, statistics or port state received by the LLDP module by
running show-relative commands.
Run the following commands in EXEC or global configuration mode:
Command Purpose
showlldperrors
Displays the error information about the
LLDP module.
showlldpinterfaceinterface-name
Displays the information about port state,
that is, the transmission mode and the
reception mode.
showlldpneighbors
Displays the abstract information about
the neighbor.