User Manual

21
Users Manual of XGS-6350-24X4C
Product Features
1.2
 Physical Ports
 24 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
 4 QSFP28 slots with each supporting native 100 Gigabit Ethernet, 40G and 4 x 10 Gigabit Ethernet
modes
 RJ45 to DB9 console interface for switch basic management and setup
 IP Routing Features
 Supports maximum 128 static routes and route summarization
 Supports dynamic routing protocol: RIP and OSPF
 Layer 2 Features
 Auto-MDI/MDI-X detection on each RJ45 port
 Prevents packet loss flow control
- IEEE 802.3x pause frame flow control in full-duplex mode
- Back-pressure flow control in half-duplex mode
 High performance Store-and-Forward architecture, broadcast storm control, port loopback detect
 32K MAC address table, automatic source address learning and aging
 Supports VLAN
- IEEE 802.1Q tag-based VLAN
- GVRP for dynamic VLAN management
- Up to 4094 active VLANs
- Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad) supported
- Private VLAN Edge (PVE) supported
- GVRP protocol for Management VLAN
- Protocol-based VLAN
- MAC-based VLAN
 Supports Link Aggregation
- Maximum 32 trunk groups, up to 8 ports per trunk group
- IEEE 802.3ad LACP (Link Aggregation Control Protocol)
- Cisco ether-channel (static trunk)
 Supports Spanning Tree Protocol
- IEEE 802.1D Classic Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
- BPDU & root guard
 Port mirroring to monitor the incoming or outgoing traffic on a particular port (many to many)