User Manual

20
Users Manual of XGS-6350-24X4C
Powerful Security
The ACL policies supported can classify the traffic by source/destination IP addresses, source/destination
MAC addresses, IP protocols, TCP/UDP, IP precedence, time ranges and ToS. Moreover, various policies can
be conducted to forward the traffic. The XGS-6350-24X4C also provides IEEE 802.1x port based access
authentication, which can be deployed with RADIUS, to ensure the port level security and block illegal users.
Thus, the XGS-6350-24X4C empowers enterprises and campuses to take full advantage of the limited
network resources and guarantees the best performance in VoIP and video conferencing transmission.
Robust Layer 2 Features
The XGS-6350-24X4C can be programmed for basic switch management functions such as port speed
configuration, port aggregation, VLAN, Spanning Tree Protocol, WRR, bandwidth control and IGMP snooping.
It also supports 802.1Q tagged VLAN, Q-in-Q, voice VLAN and GVRP Protocol. In addition, the number of
VLAN interfaces is 1K and the number of VLAN IDs is 4K. By supporting port aggregation, the
XGS-6350-24X4C allows the operation of a high-speed trunk combined with multiple ports. It enables up to 32
groups for trunking with a maximum of 8 ports for each group.
Efficient and Secure Management
For efficient management, the XGS-6350-24X4C Managed 100Gigabit Switch is equipped with console, Web
and SNMP management interfaces. With its built-in Web-based management interface, the XGS-6350-24X4C
offers an easy-to-use, platform-independent management and configuration facility. The XGS-6350-24X4C
supports standard Simple Network Management Protocol (SNMP) and can be managed via any
standard-based management software. For reducing product learning time, the XGS-6350-24X4C offers
Cisco-like command via Telnet or console port. Moreover, the XGS-6350-24X4C offers secure remote
management by supporting SSH connection which encrypts the packet content at each session.
Flexibility and Extension Solution
The XGS-6350-24X4C provides twenty four 10Gbps SFP+ and four 100Gbps QSFP28 Fiber interfaces. Each
of the SFP+ slots supports Dual Speed, 10GBASE-SR/LR or 1000BASE-SX/LX and each of the QSFP28
slots supports native 100 Gigabit Ethernet, 40G and 4 x 10 Gigabit Ethernet modes. Therefore, the
administrator can flexibly choose the suitable SFP transceiver according to not only the transmission distance,
but also the transmission speed required. The distance can be extended from 550 meters to 2km (multi-mode
fiber) or up to 10/20/30/40/50/70/120 km (single-mode fiber or WDM fiber). They are well suited for
applications within the enterprise data centers and distributions.