User Manual

168
Users Manual of XGS-6350-24X4C
the accounting method:
Run… To…
dot1xaccounting enable
Enable the dot1x accounting.
dot1x accounting method {method
name}
Configure the accounting method. Its
default value is default.
15.2.10 Configuring 802.1x guest-vlan
Guest-vlan gives releavant ports some access rights (such as downloading client software) when the client
does not respond. Guest-vlan can be any configured vlan in the system. If the configured guest-vlan does not
meet the conditions, ports cannot run in the guest-vlan.
There is no access right if the authentication fails.
Run the following command in the global mode to enable the guest-vlan:
Run… To…
Dot1x guest-vlan
Enable the guest-vlan at all ports.
When the original value of guest-vlan id at each port is 0, guest-vlan cannot function even if guest-vlan is
enabled in global mode. Only when guest-vlan id is configured in port configuration mode, guest-vlan can
function.
Run the following command in port configuration mode to configure guest-vlan id:
Run… To…
Dot1x guest-vlan {id(1-4094)}
Enable guest-vlan at all ports.
15.2.11 Forbidding Supplicant with Multiple Network Cards
Forbid the Supplicant with multiple network adapters to prevent agents. Run the following command in port
configuration mode:
Run… To…
dot1x forbid multi-network-adapter
Forbid the Supplicant with multiple
network adapters.
15.2.12 Resuming Default 802.1x Configuration
Run the following command to resume all global configuration to default configuration:
Run… To…
dot1x default
Resume all global configuration to
default configuration.