User Manual

137
Users Manual of XGS-6350-24X4C
of SNMP community, which include Read only and Read-Write.
7.8.1.2 SNMP Host Management
Figure 4: SNMP host management
On the SNMP community host page, you can know the related configuration information about SNMP host.
You can create, modify or cancel the SNMP host information, and if you click New or Edit, you can switch to
the configuration page of SNMP host.
Figure 5: SNMP host management settings
On the SNMP host configuration page, you can enter SNMP Host IP, SNMP Community, SNMP Message
Type and SNMP Community Version. SNMP Message Type includes Traps and Informs, and as to version
1, SNMP Message Type does not support Informs.
7.8.2 RMON
7.8.2.1 RMON Statistic Information Configuration
If you click Network Management Config -> RMON -> RMON Statistics -> New, the RMON Statistics page
appears.
Figure 6: Configuring the RMON statistic information
You need to set a physical port to be the reception terminal of the monitor data.
The index is used to identify a specific interface; if the index is same to that of the previous application