User Manual

117
Users Manual of XGS-6350-24X4C
Figure 14: Setting the dynamic MAC filtration mode
You can set the dynamic MAC filtration mode and the allowable maximum number of addresses on this page.
By default, the dynamic MAC filtration mode is disabled and the maximum number of addresses is 1.
7.4.7 Storm control
In the navigation bar, click Physical port Config -> Storm control. The system then enters the page, on
which the broadcast/multicast/unknown unicast storm control can be set.
7.4.7.1 Broadcast Storm Control
Figure 15: Broadcast storm control
Through the drop-down boxes in the Status column, you can decide whether to enable broadcast storm
control on a port. In the Threshold column you can enter the threshold of the broadcast packets. The legal
threshold range for each port is given behind the threshold.
7.4.7.2 Multicast Storm Control
Figure 16: Setting the broadcast storm control