User Manual
114
Users Manual of XGS-6350-24X4C
You can modify the port description on this page and enter up to 120 characters. The description of the
VLAN port cannot be set at present.
7.4.2 Configuring the Attributes of the Port
If you click Physical port config -> Port attribute Config in the navigation bar, the Port Attribute
Configuration page appears, as shown in figure 3.
Figure 3: Configuring the port attributes
On this page you can modify the on/off status, rate, duplex mode, flow control status and medium type of a
port.
1. The Web page does not support the speed and duplex mode of the
fast-Ethernet port.
2. After the speed or duplex mode of a port is modified, the link state of the port
may be switched over and the network communication may be impaired.
7.4.3 Rate control
If you click Physical port Config -> Port rate-limit Config in the navigation bar, the Port rate limit page
appears, as shown in figure 4.
Figure 4: Port’s rate limit
On this page you can set the reception speed and transmission speed of a port. By default, all ports have no
speed limited.