Layer 3 24-Port 10G SFP+ + 4-Port 100G QSFP28 Managed Switch XGS-6350-24X4C Quick Installation Guide
Table of Contents 1. Package Contents........................................................................................ 3 2. Switch Management..................................................................................... 4 3. Requirements.............................................................................................. 5 4. Terminal Setup............................................................................................ 6 4.1 Logging on to the Console......................
1. Package Contents Thank you for purchasing PLANET Layer 3 24-Port 10G SFP+ + 4-Port 100G QSFP28 Managed Switch, XGS-6350-24X4C. Unless specified, “Managed Switch” mentioned in this Quick Installation Guide refers to the XGS-6350-24X4C. Open the box of the Managed Switch and carefully unpack it.
2. Switch Management To set up the Managed Switch, the user needs to configure the Managed Switch for network management. The Managed Switch provides two management options: Out-of-Band Management and In-Band Management. Out-of-Band Management Out-of-band management is the management through console interface. Generally, the user will use out-of-band management for the initial switch configuration, or when in-band management is not available.
3. Requirements zz Workstations running Windows XP/2003/Vista/2008/7/8/10, MAC OS X or later, Linux, UNIX, or other platforms are compatible with TCP/IP protocols. zz Workstations are installed with Ethernet NIC (Network Interface Card) zz Serial Port Connection (Terminal) The above Workstations come with COM Port (DB9) or USB-to-RS232 converter. The above Workstations have been installed with terminal emulator, such as Tera Term or PuTTY.
4. Terminal Setup To configure the system, connect a serial cable to a COM port on a PC or notebook computer and to serial (console) port of the Managed Switch. The console port of the Managed Switch is DCE already, so that you can connect the console port directly through PC without the need of Null Modem.
4.1 Logging on to the Console Once the terminal is connected to the device, power on the Managed Switch, and the terminal will display “running testing procedures”. Then, the following message asks for the login user name and password. The factory default user name and password are as follows as the login screen in Figure 4-3 appears. Username: admin Password: admin Figure 4-3 Managed Switch Console Login Screen The user can now enter commands to manage the Switch.
4.2 Configuring IP Address The IP address configuration commands for VLAN1 interface are listed below. Before using in-band management, the Managed Switch must be configured with an IP address by out-of-band management (i.e. console mode). The configuration commands are as follows: Switch#config Switch_config#interface vlan 1 Switch_config_v1#ip address 192.168.1.254 255.255.255.0 The previous command would apply the following settings for the Managed Switch. IPv4 Address: 192.168.1.254 Subnet Mask: 255.
If the IP is successfully configured, the Managed Switch will apply the new IP address setting immediately. You can access the Web interface of Managed Switch through the new IP address. Note If you are not familiar with console command or the related parameter, enter “help” anytime in console to get the help description. 4.3 Setting 1000BASE-X for 10G SFP+ Port The Managed Switch supports both 1000BASE-X and 10GBASE-X SFP transceivers by manual setting and the default SFP+ port speed is set to 10Gbps.
4.4 Setting 40GBASE-X for 100G SFP+ Port The Managed Switch supports both 40GBASE-X and 100GBASE-X SFP transceivers by manual setting and the default SFP+ port speed is set to 100Gbps.
4.6 Saving the Configuration In Managed Switch, the running configuration file stores in the RAM. In the current version, the running configuration sequence running-config can be saved from the RAM to FLASH by write command, so that the running configuration sequence becomes the start-up configuration file, which is called configuration save.
5. Starting Web Management The Managed Switch provides a built-in browser interface. You can manage it remotely by having a remote host with Web browser, such as Microsoft Internet Explorer, Mozilla Firefox, Google Chrome or Apple Safari. Managed Switch MGMT RJ45/UTP Cable IP Address: 192.168.1.1 PC/Workstation with Web Browser 192.168.1.x PC/Workstation with Web Browser 192.168.0.x Managed Switch TG1~TG24 CG1~CG4 IP Address: 192.168.0.
5.1 Logging in to the Managed Switch from Management Port 1. Use Internet Explorer 8.0 or above Web browser and enter IP address http://192.168.1.1 (that you have just set in console) to access the Web interface. 2. When the following dialog box appears, please enter the configured username “admin” and password “admin” (or the username/password you have changed via console). The login screen in Figure 5-2 appears. Figure 5-2 Login Screen 3.
4. The Switch Menu on the left of the Web page lets you access all the commands and statistics the Switch provides. Now, you can use the Web management interface to continue the Switch management or manage the Managed Switch by console interface. Please refer to the user manual for more. 5.2 Saving Configuration via the Web The configuration area is to show the content that is selected in the navigation area.
6. LED Indicators System LED PWR SYS Color Green Off Green Function Lights to indicate that the Switch has power. Power is off. Blinks to indicate the system diagnosis is completed; lights to indicate the system is normally starting up. SFP+ Interfaces LED Color Function LNK/ACT Green Blinks to indicate the data is transmitting and receiving through the port; lights to indicate the link on the port is normal.
7. Customer Support Thank you for purchasing PLANET products. You can browse our online FAQ resource at the PLANET Web site first to check if it could solve your issue. If you need more support information, please contact PLANET switch support team. PLANET online FAQs: http://www.planet.com.tw/en/support/faq.php?type=1 Switch support team mail address: support_switch@planet.com.tw XGS-6350-24X4C User’s Manual http://www.planet.com.tw/en/support/download.
