Datasheet

6
XGS-6350-24X4C
Specications
Product
XGS-6350-24X4C
Hardware Specications
QSFP28 Slots 4, each supports native 100/40 Gigabit Ethernet and 4 x 10 Gigabit Ethernet modes
SFP+ Slots
24 10GBASE-SR/LR SFP+ interfaces
Compatible with 1000BASE-SX/LX/BX SFP transceiver
MGMT 1 x 10/100/1000Base-T RJ45 port
Console 1 x RJ45-to-DB9 serial port (9600, 8, N, 1)
USB 1 x USB 2.0
Switch Architecture Store-and-forward
Switch Capacity 800Gbps/non-blocking
Switch Throughput 960Mpps
Address Table 32K MAC address table with auto learning function
Shared Data Buffer 4MB
Flow Control
Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
Jumbo Frame 9KB
LED Indicator
System:
PWR, SYS
Ports:
40G/100G QSFP Port: LNK/ACT
Dimensions (W x D x H) 442.5 x 364 x 44 mm, 1U height
Weight 5990g
Power Consumption 75 watts/210 BTU (maximum)
Power Requirements AC 100~240V, 50/60Hz
Fan 4
Management Function
System Conguration Console; Telnet; SSH; SSL; Web browser; SNMP v1, v2c and v3
Management
Supports both IPv4 and IPv6 Protocols
Supports the user IP security inspection for IPv4/IPv6 SNMP
Supports MIB and TRAP
Supports IPv4/IPv6 TFTP
Supports IPv4/IPv6 NTP
Supports RMON 1, 2, 3, 9 groups
Supports the RADIUS authentication for IPv4/IPv6 Telnet user name and password
Supports IPv4/IPv6 SSH and SSL
The right conguration for users to adopt RADIUS server’s shell management
Supports CLI, console, Telnet
Supports SNMPv1, v2c and v3
Supports Security IP safety net management function: avoid unlawful landing at non-restrictive area
Supports syslog server for IPv4 and IPv6
Supports TACACS+
Layer 3 Function
Routing Protocol Static routing, RIP and OSPF
Routing Table 16K
DHCP
DHCP client
DHCP server, default route
DHCP relay
VRRP
Congure VRRP in interface VLAN;
VRRP priority;
VRRP standby;
VRRP track
Load Balancing Use of equivalent routing, the correct load balancing function (by ow)
Layer 2 Function
Port Conguration
Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable/enable
Bandwidth control on each port
Port loopback detect
Port Status Display each port’s speed duplex mode, link status, ow control status and auto negotiation status