Datasheet

XGS-6350-24X4C
2
Layer 3 Routing Support
The XGS-6350-24X4C enables the administrator to conveniently boost network
efficiency by configuring Layer 3 static routing manually, the RIP (Routing
Information Protocol) or OSPF (Open Shortest Path First) settings automatically.
The RIP can employ the hop count as a routing metric and prevent routing loops
by implementing a limit on the number of hops allowed in a path from the source
to a destination. The OSPF is an interior dynamic routing protocol for autonomous
system based on link-state. The protocol creates a link-state database by
exchanging link-states among Layer 3 switches, and then uses the Shortest Path
First algorithm to generate a route table based on that database.
High Performance
The XGS-6350-24X4C boasts a high-performance switch architecture that is
capable of providing non-blocking switch capacity and wire-speed throughput as
high as 1.28Tbps, which greatly simplifies the tasks of upgrading the LAN for
catering to increasing bandwidth demands.
Abundant IPv6 Support
The XGS-6350-24X4C provides IPv6 management and enterprise-level secure
features such as SSH, ACL, WRR (Weighted Round Robin) and RADIUS
authentication. The XGS-6350-24X4C thus helps the enterprises to step in the IPv6
era with the lowest investment. In addition, you don’t need to replace the network
facilities when the IPv6 FTTx edge network is built.
–
MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol,
spanning tree by VLAN)
–
BPDU & root guard
• Port mirroring to monitor the incoming or outgoing trafc on
a particular port (many to many)
• Provides port mirror (many-to-1)
Quality of Service
• 8 priority queues on all switch ports
• Supports strict priority and WRR (Weighted Round Robin)
CoS policies
• Trafc classication
–
IEEE 802.1p CoS/ToS
–
IPv4/IPv6 DSCP
–
Port-based WRR
• Strict priority and WRR CoS policies
Multicast
• Supports IPv4 IGMP snooping v1, v2 and v3; and IPv6
MLD v1 and v2 snooping
• Querier mode supports
• Supports Multicast VLAN Register (MVR)
Security
• IEEE 802.1x port-based network access authentication
• MAC-based network access authentication
• Built-in RADIUS client to co-operate with the RADIUS
servers for IPv4 and IPv6
• TACACS+ login users access authentication
• IP-based Access Control List (ACL)
• MAC-based Access Control List
• Supports DHCP snooping
• Supports ARP inspection
• IP Source Guard prevents IP spoong attacks
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
Management
• Management IP for IPv4 and IPv6
• Switch Management Interface
–
Console/Telnet Command Line Interface
–
Web switch management
–
SNMP v1, v2c and v3 switch management
–
SSH secure access
RJ45 Management Port
RJ45 Type Console
24 x 10G SFP+
4 x 40/100G
QSFP28
USB
Grounding
Backup Power Slot
AC Power Input