XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
98
Command
Explanation
Global Mode
interface ethernet <interface-list>
Enters the network port configuration mode.
2. Configure the properties for the Ethernet ports
Command
Explanation
Port Mode
media-type {copper | copper-preferre
d-auto | fiber | sfp-preferred-auto}
Sets the combo port mode (combo ports
only).
shutdown
no shutdown
Enables/Disables specified ports.
description <string>
no description
Specifies or cancels the name of specified
ports.
speed-duplex {auto [10 [100 [1000]]
[auto | full | half |]] | force10-half | f
orce10-full | force100-half | force100-
full | force100-fx [module-type {auto-
detected | no-phy-integrated | phy-in
tegrated}] | {{force1g-half | force1g-f
ull} [nonegotiate [master | slave]]}| f
orce10g-full}
no speed-duplex
Sets port speed and duplex mode of
100/1000Base-TX or 100Base-FX ports. The
no format of this command restores the
default setting, i.e., negotiates speed and
duplex mode automatically.
negotiation {on|off}
Enables/Disables the auto-negotiation
function of 1000Base-FX ports.
bandwidth control <bandwidth> [bot
h | receive | transmit]
no bandwidth control
Sets or cancels the bandwidth used for
incoming/outgoing traffic for specified ports.
flow control
no flow control
Enables/Disables traffic control function for
specified ports.
loopback
no loopback
Enables/Disables loopback test function for
specified ports.