XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
77
（1）Start TFTP server
Command
Explanation
Global Mode
tftp-server enable
no tftp-server enable
Start TFTP server, the no command shuts down
TFTP server and prevents TFTP user from
logging in.
（2）Modify TFTP server connection idle time
Command
Explanation
Global Mode
tftp-server retransmission-timeout
<seconds>
Set maximum retransmission time within timeout
interval.
（3）Modify TFTP server connection retransmission time
Command
Explanation
Global Mode
tftp-server retransmission-number
<number>
Set the retransmission time for TFTP server.
1.1.1.17 FTP/TFTP Configuration Examples
The configuration is same for IPv4 address or IPv6 address. The example only for IPv4
address.
Fig 2-3 Download nos.img file as FTP/TFTP client
Scenario 1: The switch is used as FTP/TFTP client. The switch connects from one of its ports
to a computer, which is a FTP/TFTP server with an IP address of 10.1.1.1; the switch acts as a
FTP/TFTP client, the IP address of the switch management VLAN is 10.1.1.2. Download
“nos.img” file in the computer to the switch.
10.1.1.2
10.1.1.1