XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
62
no interface vlan <vlan-id>
no command deletes the VLAN interface.
interface ethernet <interface-name>
E
nter the network management port
configuration mode.
2. Manual configuration
Command
Explanation
VLAN Interface Mode
ip address <ip_address> <mask> [secon
dary]
no ip address <ip_address> <mask> [se
condary]
Configure IP address of VLAN interface; the
no command deletes IP address of VLAN
interface.
ipv6 address <ipv6-address / prefix-leng
th> [eui-64]
no ipv6 address <ipv6-address / prefix-l
ength>
Configure IPv6 address, including
aggregation global unicast address, local site
address and local link address. The no
command deletes IPv6 address.
3. BOOTP configuration
Command
Explanation
VLAN Interface Mode
ip bootp-client enable
no ip bootp-client enable
Enable the switch to be a BootP client and
obtain IP address and gateway address
through BootP negotiation; the no command
disables the BootP client function.
4. DHCP configuration
Command
Explanation
VLAN Interface Mode
ip bootp-client enable
no ip bootp-client enable
Enable the switch to be a DHCP client and
obtain IP address and gateway address
through DHCP negotiation; the no command
disables the DHCP client function.
4.4 SNMP Configuration
4.4.1
Introduction to SNMP
SNMP (Simple Network Management Protocol) is a standard network management