XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
58
Telnet function.
username <user-name> [privilege <privil
ege>] [password [0 | 7] <password>]
no username <username>
Configure user name and password of
the telnet. The no form command deletes
the telnet user authorization.
aaa authorization config-commands
no aaa authorization config-commands
Enable command authorization function
for the login user with VTY (login with
Telnet and SSH). T
he no command
disables this function. Only enabling this
command and configuring command
authorization manner, it will request to
authorize when executing some
command.
authentication securityip <ip-addr>
no authentication securityip <ip-addr>
Configure the secure IP address to login
to the switch through Telnet: the no
command deletes the authorized Telnet
secure address.
authentication securityipv6 <ipv6-addr>
no authentication securityipv6 <ipv6-add
r>
Configure IPv6 security address to login
to the switch through Telnet; the no
command deletes the authorized Telnet
security address.
authentication ip access-class {<num-st
d>|<name>}
no authentication ip access-class
Binding standard IP ACL protocol to login
with Telnet/SSH/Web; t
he no form
command will cancel the binding ACL.
authentication ipv6 access-class {<num-
std>|<name>}
no authentication ipv6 access-class
Binding standard IPv6 ACL protocol to
login with Telnet/SSH/Web; the no form
command will cancel the binding ACL.
authentication line {console | vty | web}
login method1 [method2 …]
no authentication line {console | vty | web}
login
Configure authentication method list with
telnet.
authentication enable method1 [method
2 …]
no authentication enable
Configure the
enable authentication
method list.
authorization line {console | vty | web}
exec method1 [method2 …]
no authorization line {console | vty | web}
exec
Configure the authorization method list
with telnet.
authorization line vty command <1-15>
Configure command authorization