XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
74-11
vsf member <member-id> description
<text>
no vsf member <member-id> descrip
tion
Describe the VSF members. This information
will be only written in the VSF master confi
guration file. The no command deletes this i
nformation.
vsf link delay<interval>
no vsf link delay
Configure the down delaying reporting functio
n of the VSF link, using for avoid link to spli
t and merge due to changing in short period
of time. The no command will set the time
for delay report to default value.
vsf mac-address persistent <timer |
always>
no vsf mac-address persistent
Configure VSF split group MAC address rete
ntion time. No command deletes the MAC a
ddress retention time.
vsf non-wait port-inactive
no vsf non-wait port-inactive
Detect the VSF link status’ change quickly fo
r discovering the vsf splitting. The no comm
and recovers to be the default method.
74.2.2 LACP MAD Configuration
LACP MAD configuration task list:
1. Create the aggregation groups
2.
Add the port into the aggregation group, and one is with the active method at least
3. Configure the quick detection (optional)
4. Enable LACP MAD
1. Create the aggregation groups
Command
Explanation
Global Mode
port-group <port-group id>
no Port-group <port-group id>
Create/delete the port-group.
2. Add the port into the aggregation group
Command
Explanation
Global Mode
interface ethernet <port-num>
Enter into the port mode.
Port Mode
port-group <port-group id> mode <ac
tive | passive>
no port-group <port-group id>
Add the port into the aggregation group or l
et it quit.
3. Configure the quick detection
Command
Explanation