XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
63-5
Admin mode
show ulpp group [group-id]
Show the configuration information of th
e configured ULPP group.
show ulpp flush counter interface {et
hernet <IFNAME> | <IFNAME>}
Show the statistic information of the flus
h packets.
show ulpp flush-receive-port
Show flush type and control VLAN recei
ved by the port.
clear ulpp flush counter interface <na
me>
Clear the statistic information of the flus
h packets.
debug ulpp flush {send | receive} inte
rface <name>
no debug ulpp flush {send | receive}
interface <name>
Show the information of the receiving a
nd sending flush packets, the no operati
on disables the shown information.
debug ulpp flush content interface <n
ame>
no debug ulpp flush content interface
<name>
Show the contents of the received flush
packets, the no operation disables the
showing.
debug ulpp error
no debug ulpp error
Show the error information of ULPP, the
no operation disables the showing.
debug ulpp event
no debug ulpp event
Show the event information of ULPP, th
e no operation disables the showing.
63.3 ULPP Typical Examples
63.3.1
ULPP Typical Example1