XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
59-18
The client can be redirected authentication only through accessing “test.permit.com”
before authentication. It cannot be redirected authentication by accessing other address.
59.6.4 http-redirect-filter Troubleshooting
If there are problems in using http-redirect-filter function, please check it with the fo
llowing steps:
 Check if the configured rule is matching to the accessed domain name.
 If the DNS server configuration is correct and if it can analys the configured domai
n name correctly.
 If the command of http-redirect-filter under captive-portal configuration is configured.
59.7 Portal Non-perception
59.7.1
Introduction to Portal Non-perception
MAC authentication has the user experience that is "a authentication, multiple use".
If you opened the fast authentication of MAC, the user successfully authenticates the f
irst landing Portal page, subsequent user can use any application.
In order to achieve a large number of user's fast authentication of MAC, user must
use an external server to save the MAC binding information, and add it dynamically b
ut not manually. This new realization of the program is called fast authentication of MA
C scheme, since the user does not need to manually enter the user name and passwo
rd for authentication when access network again, also known as Portal non-perception
of authentication scheme.
59.7.2 Portal Non-perception Configuration
1. Enable/disable the quick mac authentication function
Command Explanation
Captive Portal Config Mode
fast-mac-auth
no fast-mac-auth
Enable/disable the quick mac authenticatio
n function.
59.7.3 Portal Non-perception Examples
The created environment is as the following figure including the parts as below: