XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
59-13
59.5 Automatic Page Pushing after Successful Auth
entication (it is not supported currently)
59.5.1
Introduction to Automatic Page Pushing after Succe
ssful Authentication
The automatic page pushing function after the successful authentication means that
the web page which user needs to access can be re-opened after the authentication.
According to the actual situation, the welcome page before the automatic pushing authe
ntication or the appointed web page by the automatic pushing function can be configur
ed.
59.5.2 Automatic Page Pushing after Successful Authentic
ation Configuration
Automatic Page Pushing after Successful Authentication Configuration is as below:
1. Enable/disable the captive portal authentication function
2. Configure the automatic page pushing after successful authentication
1. Enable/disable the captive portal authentication function
2. Configure the automatic page pushing after successful authentication
Command
Explanation
Captive Portal Instance Mode
redirect attribute url-after-login enable
no redirect attribute url-after-login enabl
e
Enable the function that the redirect url ca
rries the pushed url after the successful a
uthentication. The no command disables it.
redirect attribute url-after-login name <n
ame>
no redirect attribute url-after-login name
Configure the attribute name of the pushe
d url after the successful authentication w
hich is carried in the redirect url. The no
command recovers the name to be the de
Command
Explanation
Captive Portal Mode
enable
disable
Enable/disable the captive portal authentic
ation function on the switch.