XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
59-7
function.
59.2 Accounting Function Configuration
59.2.1
Introduction to Accounting Function
The accounting function is used to monitoring and accounting users who using the
network resources. Client is unable to access the network resources before pass the c
aptive portal authentication, only through the portal authentication to access network res
ources. Define user’s session duration to control the use of network resources time and
flow of information.
59.2.2 Accounting Function Configuration
Accounting function configuration task list is as below:
1. Configure RADIUS accounting server
1) Configure/delete accounting server address
2. Configure AAA accounting function
1) Enable/disable accounting service function
3. Configure captive portal accounting function
1) Block/unblock portal function
2) Configure/delete captive portal configuration name
3) Enable/disable captive portal accounting function
4) Configure/delete captive portal accounting server name
5) Configure/delete captive portal session time
1. Configure RADIUS accounting server
2. Configure AAA accounting function
Command
Explanation
Global Mode
radius-server accounting host <A.B.C.D>
no radius-server accounting host <A.B.C.
D>
Configure/delete accounting serv
er address
Command
Explanation
Global Mode