XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
59-2
Authentication function task list is as below:
1. Enable/disable captive portal authentication function
2. Configure captive portal redirect function
1) Configure or delete the portal server name
2) Configure the user instance
3) Configure redirect address
4) Configure the redirect url-head
5) Configure/delete radius server name
6) Configure to bind or relieve the portal server
7) Configure the url to carry the parameter of ac-name
8) Configure the url to carry the parameter of ssid
9) Configure the url to carry the parameter of nas-ip
3. Configure AAA function
1) Enable/stop AAA function
2) Configure RADIUS authentication server group name
4. Configure RADIUS authentication server
1) Configure RADIUS server key
2) Configure RADIUS authentication server address
5. Bind the portal rule to the port
1. Enable/disable captive portal authentication function
2. Configure captive portal redirect function
Command
Explanation
Captive Portal Configuration Mode
enable
disable
Enable/disable captive portal fun
ction globally.
Command
Explanation
Captive Portal Configuration Mode
external portal-server server-name <name>
{ipv4 | ipv6} <ipaddr> [port <1-65535>]
no external portal-server {ipv4 | ipv6}server
-name <name>
Configure/delete external portal ser
ver.
nas-ip4 <A.B.C.D>
Configure the nas-ip address.
configuration <cp-id>
no configuration <cp-id>
Configure/delete portal routine of
different types of users. 10 kind
s of routines can be configured.