XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
58-3
prepare-delay>
no savi max-dad-prepare-delay
e period for SAVI binding, no comm
and restores the default value.
6. Configure the global max-slaac-life for SAVI
Command
Explanation
Global mode
savi max-slaac-life <max-slaac-life>
no savi max-slaac-life
Configure the lifetime period of the d
ynamic slaac binding at BOUND stat
e, no command restores the default
value.
7. Configure the lifetime period for SAVI bind-protect
Command
Explanation
Global mode
savi timeout bind-protect <protect-ti
me>
no savi timeout bind-protect
Configure the bind-protect lifetime peri
od to a port after its state from up to
down, no command restores the defau
lt value.
8. Enable or disable SAVI prefix check function
Command
Explanation
Global mode
ipv6 cps prefix check enable
no ipv6 cps prefix check enable
Enable the address prefix check for S
AVI, no command disables the functio
n.
9. Configure IPv6 address prefix for a link
Command
Explanation
Global mode
ipv6 cps prefix <ip-address> vlan <v
id>
no ipv6 cps prefix <ip-address>
Configure IPv6 address prefix for a lin
k manually, no command deletes the
configured address prefix.
10. Configure the filter entry number of IPv6 address
Command
Explanation
Global mode
savi ipv6 mac-binding-limit <limit-nu
m>
Configure the corresponding dynamic
binding number for the same MAC ad