XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
58-2
14. Enable or disable ND trust of port
15. Configure the binding number
1. Enable or disable SAVI function
Command
Explanation
Global mode
savi enable
no savi enable
Enable the global SAVI function, no co
mmand disables the function.
2. Enable or disable application scene function for SAVI
Command
Explanation
Global mode
savi ipv6 {dhcp-only | slaac-only | d
hcp-slaac} enable
no savi ipv6 {dhcp-only | slaac-only
| dhcp-slaac} enable
Enable the application scene function f
or SAVI, no command disables the fun
ction.
3. Configure SAVI binding function
Command
Explanation
Global mode
savi ipv6 check source binding ip <i
p-address> mac <mac-address> inter
face <if-name> {type [slaac | dhcp] l
ifetime <lifetime> | type static}
no savi ipv6 check source binding i
p <ip-address> interface <if-name>
Configure a static or dynamic binding
manually, no command deletes the co
nfigured binding. This command may
be configured in a global function of s
avi enable, slaac-only enable, dhcp-onl
y enable or dhcp-slaac enable.
4. Configure the global max-dad-delay for SAVI
Command
Explanation
Global mode
savi max-dad-delay <max-dad-delay>
no savi max-dad-delay
Configure the max lifetime period of S
AVI binding at DETECTION state, no
command restores the default value.
5. Configure the global max-dad-prepare-delay for SAVI
Command
Explanation
Global mode
savi max-dad-prepare-delay <max-dad-
Configure the max redetection lifetim