XGS-5240-Series User Manual

Table Of Contents
Configuration Guide of XGS-5240-Series
56-3
mac-authentication-bypass timeout
quiet-period <1-60>
no mac-authentication-bypass time
out quiet-period
Set quiet-period of MAB authentication.
mac-authentication-bypass timeout
stale-period <0-60>
no mac-authentication-bypass timeout
stale-period
Set the time that delete the binding after
the port is down.
mac-authentication-bypass timeout
linkup-period <0-30>
no mac-authentication-bypass timeou
t linkup-period
To obtain IP again, set the interval of do
wn/up when MAB binding is changing int
o VLAN.
mac-authentication-bypass spoofing-g
arp-check enable
no mac-authentication-bypass spoo
fing-garp-check enable
Enable the spoofing-garp-check function,
MAB function will not deal with spoofing-
garp any more; the no command disable
s the function.
authentication mab {radius | none}
no authentication mab
Configure the authentication mode and pr
iority of MAC address, the no command
restores the default authentication mode.
56.3 MAB Example
Example:
The typical example of MAB authentication function: