XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
52-6
Switch(config)#radius-server accounting host 10.1.1.3
Switch(config)#radius-server key test
Switch(config)#aaa enable
Switch(config)#aaa-accounting enable
52.3.2 IPv6 RadiusExample
Fig 8-3 The Topology of IPv6 Radius configuration
A computer connects to a switch, of which the IP address is 2004:1:2:3::2 and con
nected with a RADIUS authentication server without Ethernet1/0/2; IP address of the se
rver is 2004:1:2:3::3 and the authentication port is defaulted at 1812, accounting port is
defaulted at 1813.
Configure steps as below:
Switch(config)#interface vlan 1
Switch(Config-if-vlan1)#ipv6 address 2004:1:2:3::2/64
Switch(Config-if-vlan1)#exit
Switch(config)#radius-server authentication host 2004:1:2:3::3
Switch(config)#radius-server accounting host 2004:1:2:3::3
Switch(config)#radius-server key test
Switch(config)#aaa enable
Switch(config)#aaa-accounting enable
2004:1:2:3::1
2004:1:2:3::2
Radius Server
2004:1:2:3::3