XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
52-3
17
(unassigned)
39
Framed-AppleTalk-Zone
18
Reply-Message
40-59
(reserved for accounting)
19
Callback-Number
60
CHAP-Challenge
20
Callback-Id
61
NAS-Port-Type
21
(unassigned)
62
Port-Limit
22
Framed-Route
63
Login-LAT-Port
 Length field (1 octet), the length in octets of the attribute including Type, Length a
nd Value fields.
 Value field, value of the attribute whose content and format is determined by the t
ype and length of the attribute.
52.2 RADIUS Configuration Task List
1. Enable the authentication and accounting function
2. Configure the RADIUS authentication key
3. Configure the RADIUS server
4. Configure the parameter of the RADIUS service
5. Configure the IP address of the RADIUS NAS
1. Enable the authentication and accounting function
2. Configure the RADIUS authentication key
Command
Explanation
Global Mode
Command
Explanation
Global Mode
aaa enable
no aaa enable
To enable the AAA authentication functio
n. The no form of this command will di
sable the AAA authentication function.
aaa-accounting enable
no aaa-accounting enable
To enable AAA accounting. The no form
of this command will disable AAA acco
unting.
aaa-accounting update {enable|disabl
e}
Enable or disable the update accounting
function.