XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
52-2
d is show as below:
1 Access-Request
2 Access-Accept
3 Access-Reject
4 Accounting-Request
5 Accounting-Response
11 Access-Challenge
Identifier field (1 octet): Identifier for the request and answer packets.
Length field (2 octets): The length of the overall RADIUS packet, including Code, Identif
ier, Length, Authenticator and Attributes
Authenticator field (16 octets): used for validation of the packets received from the RAD
IUS server. Or it can be used to carry encrypted passwords. This field falls into two ki
nds: the Request Authenticator and the Response Authenticator.
Attribute field: used to carry detailed information about AAA. An Attribute value is forme
d by Type, Length, and Value fields.
 Type field (1 octet), the type of the attribute value, which is shown as below:
Property
Type of property
Property
Type of property
1
User-Name
23
Framed-IPX-Network
2
User-Password
24
State
3
CHAP-Password
25
Class
4
NAS-IP-Address
26
Vendor-Specific
5
NAS-Port
27
Session-Timeout
6
Service-Type
28
Idle-Timeout
7
Framed-Protocol
29
Termination-Action
8
Framed-IP-Address
30
Called-Station-Id
9
Framed-IP-Netmask
31
Calling-Station-Id
10
Framed-Routing
32
NAS-Identifier
11
Filter-Id
33
Proxy-State
12
Framed-MTU
34
Login-LAT-Service
13
Framed-Compression
35
Login-LAT-Node
14
Login-IP-Host
36
Login-LAT-Group
15
Login-Service
37
Framed-AppleTalk-Link
16
Login-TCP-Port
38
Framed-AppleTalk-Network