XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
45-18
ipv6 access-list standard <name>
no ipv6 access-list standard <name>
Creates a standard IP acce
ss-list based on nomenclatu
re; the no command delete
the name-based standard IP
v6 access-list.
b. Specify multiple permit or deny rules
Command
Explanation
Standard IPv6 ACL Mode
[no] {deny | permit} {{<sIPv6Prefix/sPrefixlen>} | a
ny-source | {host-source <sIPv6Addr> }}
Creates a standard name-b
ased IPv6 access rule; the
no form command deletes t
he name-based standard IP
v6 access rule.
c. Exit name-based standard IP ACL configuration mode
Command
Explanation
Standard IPv6 ACL Mode
exit
Exits name-based standard
IPv6 ACL configuration mod
e.
（
13
）
Configuring an name-based extended IPv6 access-list
a. Create an extended IPv6 access-list basing on nomenclature
Command
Explanation
Global Mode
ipv6 access-list extended <name>
no ipv6 access-list extended <na
me>
Creates an extended IPv6 access-list basing
on nomenclature; the no command deletes th
e name-based extended IPv6 access-list.
b. Specify multiple permit or deny rules
Command
Explanation
Extended IPv6 ACL Mode
[no] {deny | permit} icmp {{<sIPv
6Prefix/sPrefixlen>} | any-source |
{host-source <sIPv6Addr>}} {<dI
Pv6Prefix/dPrefixlen> | any-destin
ation | {host-destination <dIPv6A
ddr>}} [<icmp-type> [<icmp-cod
e>]] [dscp <dscp>] [flow-label <fl
owlabel>] [time-range <time-range
Creates an extended name-based ICMP IPv6
access rule; the no form command deletes
this name-based extended IPv6 access rule.