XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
44-2
multicast-vlan mode {dynamic| compatib
le}
no multicast-vlan mode {dynamic| comp
atible}
Configure the two modes of multicast vlan.
The no command cancels the mode confi
guration.
2. Configure the IGMP Snooping
Command
Explanation
Global Mode
ip igmp snooping vlan <vlan-id>
no ip igmp snooping vlan <vlan-id>
Enable the IGMP Snooping function on th
e multicast VLAN. The no form of this co
mmand disables the IGMP Snooping on th
e multicast VLAN.
ip igmp snooping
no ip igmp snooping
Enable the IGMP Snooping function. The
no form of this command disables the IG
MP snooping function.
3. Configure the MLD Snooping
ipv6 mld snooping vlan <vlan-id>
no ipv6 mld snooping vlan <vlan-id>
Enable MLD Snooping on multicast VLAN;
the no form of this command disables M
LD Snooping on multicast VLAN.
ipv6 mld snooping
no ipv6 mld snooping
Enable the MLD Snooping function. The n
o form of this command disables the MLD
snooping function.
44.3 Multicast VLAN Examples
Fig 3-1 Function configuration of the Multicast VLAN
As shown in the figure, the multicast server is connected to the layer 3 switch swit
chA through port 1/0/1 which belongs to the VLAN10 of the switch. The layer 3 switch