XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
43-6
d> limit
ipv6 mld snooping vlan <vlan-id>
l2-general-querier
no ipv6 mld snooping vlan <vlan-i
d> l2-general-querier
Set the VLAN level 2 general querier, which is r
ecommended on each segment. The “no” form o
f this command cancels the level 2 general quer
ier configuration.
ipv6 mld snooping vlan <vlan-id>
mrouter-port interface <interface –
name>
no ipv6 mld snooping vlan <vlan-i
d> mrouter-port interface <interfac
e –name>
Configure the static mrouter port in specific vlan.
The “no” form of this command cancels the mr
outer port configuration.
ipv6 mld snooping vlan <vlan-id>
mrouter-port learnpim6
no ipv6 mld snooping vlan <vlan-i
d> mrouter-port learnpim6
Enable the function that the specified VLAN lear
ns mrouter-port (according to pimv6 packets), th
e no command will disable the function.
ipv6 mld snooping vlan <vlan-id>
mrpt <value>
no ipv6 mld snooping vlan <vlan-i
d> mrpt
Configure the keep-alive time of the mrouter por
t. The “no” form of this command restores to th
e default.
ipv6 mld snooping vlan <vlan-id>
query-interval <value>
no ipv6 mld snooping vlan <vlan-i
d> query-interval
Configure the query interval. The “no” form of th
is command restores to the default.
ipv6 mld snooping vlan <vlan-id>
immediate-leave
no ipv6 mld snooping vlan <vlan-i
d> immediate-leave
Configure immediate leave multicast group functi
on for the MLD Snooping of specific VLAN. The
“no” form of this command cancels the immedi
ate leave configuration.
ipv6 mld snooping vlan <vlan-id>
query-mrsp <value>
no ipv6 mld snooping vlan <vlan-i
d> query-mrsp
Configure the query maximum response period.
The “no” form of this command restores to the
default.
ipv6 mld snooping vlan <vlan-id>
query-robustness <value>
no ipv6 mld snooping vlan <vlan-i
d> query-robustness
Configure the query robustness, the “no” form of
this command restores to the default.
ipv6 mld snooping vlan <vlan-id>
suppression-query-time <value>
Configure the suppression query time. The “no” f
orm of this command restores to the default