XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
41-2
string with hex
format in ip
dhcp pool mode.
option 60 ip A.B.C.D
Configure option 60 character
string with IP format in ip dhcp
pool mode.
option 43 ip A.B.C.D
Configure option 43 character
string with IP format in ip dhcp
pool mode.
no option 60
Delete the configured option
60 in the address pool mode.
no option 43
Delete the configured option
43 in the address pool mode.
41.3 DHCPv6 option 60 and option 43 Example
Fig 6-1 Typical DHCP option 60 and option 43 topology
Fit AP obtains IP address and option 43 attribute by DHCP server to send unicast
discovery request for wireless controller. DHCP server configures option 60 matched with the
option 60 of fit ap to return option 43 attribute to FTP AP. The wireless controller addresses of
DHCP option 43 are 192.168.10.5 and 192.168.10.6.
Configuration procedure:
# Configure DHCP server
switch (config)#ip dhcp pool a
switch (dhcp-a-config)#option 60 ascii AP1000
switch (dhcp-a-config)#option 43 hex 0104C0A80A050104C0A80A06