XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
37-4
ipv6 dhcp server <poolname>
[preference <value>] [rapid-commit]
[allow-hint]
no ipv6 dhcp server <poolname>
To enable DHCPv6 server function on
specified port, and binding
the used
DHCPv6 address pool.
37.3 DHCPv6 Relay Delegation Configuration
DHCPv6 relay delegation configuration task list as below:
1． To enable/disable DHCPv6 service
2． To configure DHCPv6 relay delegation on port
1. To enable DHCPv6 service
Command
Explanation
Global Mode
service dhcpv6
no service dhcpv6
To enableDHCPv6 service.
2. To configure DHCPv6 relay delegation on port
Command
Explanation
Interface Configuration Mode
ipv6 dhcp relay destination {[<ipv6-add
ress>] [interface { <interface-name> | v
lan <1-4096>}]}
no ipv6 dhcp relay destination {[<ipv6-
address>] [interface { <interface-name>
| vlan <1-4096>}]}
To specify the destination address of
DHCPv6 relay transmit; The no form of
this command delete the configuration.
37.4 DHCPv6 Prefix Delegation Server Configuration
DHCPv6 prefix delegation server configuration task list as below:
1. To enable/delete DHCPv6 service
2. To configure prefix delegation pool
3. To configure DHCPv6 address pool
（1） To achieve/delete DHCPv6 address pool
（2） To configure prefix delegation pool used by DHCPv6 address pool