XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
199
Chapter 23 MAC Table Configuration
23.1 Introduction to MAC Table
MAC table is a table identifies the mapping relationship between destination MAC
addresses and switch ports. MAC addresses can be categorized as static MAC addresses and
dynamic MAC addresses. Static MAC addresses are manually configured by the user, have
the highest priority and are permanently effective (will not be overwritten by dynamic MAC
addresses); dynamic MAC addresses are entries learnt by the switch in data frame forwarding,
and is effective for a limited period. When the switch receives a data frame to be forwarded, it
stores the source MAC address of the data frame and creates a mapping to the destination
port. Then the MAC table is queried for the destination MAC address, if hit, the data frame is
forwarded in the associated port, otherwise, the switch forwards the data frame to its
broadcast domain. If a dynamic MAC address is not learnt from the data frames to be
forwarded for a long time, the entry will be deleted from the switch MAC table.
There are two MAC table operations:
1. Obtain a MAC address.
2. Forward or filter data frame according to the MAC table.
23.1.1 Obtaining MAC Table
The MAC table can be built up statically and dynamically. Static configuration is to set up a
mapping between the MAC addresses and the ports; dynamic learning is the process in which
the switch learns the mapping between MAC addresses and ports, and updates the MAC table
regularly. In this section, we will focus on the dynamic learning process of MAC table.