XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
191
ports that may be added to Voice VLAN must be configured as Hybrid port.
22.6.2 Voice VLAN Configuration
Voice VLAN Configuration Task Sequence:
1. Set the VLAN to Voice VLAN
2. Add a voice equipment to Voice VLAN
3. Enable the Voice VLAN on the port
1. Configure the VLAN to Voice VLAN
2. Add a Voice equipment to a Voice VLAN
3. Enable the Voice VLAN of the port
22.6.3 Typical Applications of the Voice VLAN
Scenario:
A company realizes voice communication through configuring Voice VLAN. IP-phone1
and IP-phone2 can be connected to any port of the switch, namely normal communication and
interconnected with other switches through the uplink port. IP-phone1 MAC address is
Command
Explanation
Global Mode
voice-vlan vlan <vlan-id>
no voice-vlan
Set/cancel the VLAN as a Voice VLAN
Command
Explanation
Global Mode
voice-vlan mac <mac-address>
<mac-address-mask> priority <priority-id>
[name <voice-name>]
no voice-vlan {mac <mac-address>
<mac-address-mask>|name <voice-name>
|all}
Specify certain voice equipment
join/leave the Voice VLAN
Command
Explanation
Port Mode
switchport voice-vlan enable
no switchport voice-vlan enable
Enable/disable the Voice VLAN function
on the port