XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
159
{description-language | province-state | city |
county | street | locationNum | location | floor | room
| postal | otherInfo} <address>
no {description-language | province-state | city |
county | street | locationNum | location | floor | room
| postal | otherInfo}
Configure the detailed address
after enter Civic Address LCI
address mode of the port.
Global mode
lldp med fast count <value>
no lldp med fast count
When the fast LLDP-MED st
artup mechanism is enabled,
it needs to fast send the L
LDP packets with LLDP-ME
D TLV, this command is use
d to set the value of the fas
t sending packets, the no co
mmand restores the default
value.
Admin mode
show lldp
Show the configuration of the
global LLDP and LLDP-MED.
show lldp [interface ethernet <IFNAME>]
Show the
configuration of
LLDP and LLDP-MED on the
current port.
show lldp neighbors [interface ethernet <IFNAME>]
Show LLDP and LLDP-MED
configuration of the neighbo
rs.
show lldp traffic
Show the statistics of the sent
and received packets of port
LLDP and LLDP-MED.