XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
154
4. Enable EFM OAM loopback of port
18.3 EFM OAM Example
Example:
CE and PE devices with point-to-point link enable EFM OAM to monitor “the First Mile”
link performance. It will report the log information to network management system when
occurring fault event and use remote loopback function to detect the link in necessary
instance.
ethernet-oam errored-symbol-period thresho
ld high {high-symbols | none}
no ethernet-oam errored-symbol-period thre
shold high
C
onfigure the high threshold of
errored symbol period event, no
command restores the default value.
(optional)
ethernet-oam errored-frame-period threshold
high {high-frames | none}
no ethernet-oam errored-frame-period thres
hold high
C
onfigure the high threshold of
errored frame period event, no
command restores the default value.
(optional)
ethernet-oam errored-frame threshold high
{high-frames | none}
no ethernet-oam errored-frame threshold hi
gh
C
onfigure the high threshold of
errored frame event, no command
restores the default value. (optional)
ethernet-oam errored-frame-seconds thresho
ld high {high-frame-seconds | none}
no ethernet-oam errored-frame-seconds thre
shold high
Configure the high
threshold of
errored frame seconds event, no
command restores the default value.
(optional)
Command
Explanation
Port mode
ethernet-oam remote-loopback
no ethernet-oam remote-loopback
Enable remote EFM OAM entity to
enter OAM loopback mode (its peer
needs to configure OAM loopback
supporting), no command cancels
remote OAM loopback.
ethernet-oam remote-loopback supported
no ethernet-oam remote-loopback supporte
d
Enable remote loopback supporting
of port, no command cancels remote
loopback supporting of port.