XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
153
2. Configure link monitor
3. Configure remote failure
ethernet-oam timeout <seconds>
no ethernet-oam timeout
C
onfigure timeout of EFM OAM
connection, no command restores
the default value.
Command
Explanation
Port mode
ethernet-oam link-monitor
no ethernet-oam link-monitor
Enable link monitor of EFM OAM, no
command disables link monitor.
ethernet-oam errored-symbol-period {thresh
old low <low-symbols> | window <second
s>}
no ethernet-oam errored-symbol-period {thr
eshold low | window }
Configure the
low threshold and
window period of errored symbol
period event, no command resotores
the default value. (optional)
ethernet-oam errored-frame-period {threshol
d low <low-frames> | window <seconds>}
no ethernet-oam errored-frame-period {thres
hold low | window }
C
onfigure the low threshold and
window period of errored frame
period event, no command resotores
the default value.
ethernet-oam errored-frame {threshold low
<low-frames> | window <seconds>}
no ethernet-oam errored-frame {threshold lo
w | window }
C
onfigure the low threshold and
window period of errored frame
event, no command resotores the
default value. (optional)
ethernet-oam errored-frame-seconds {thresh
old low <low-frame-seconds> | window <se
conds>}
no ethernet-oam errored-frame-seconds {thr
eshold low | window }
C
onfigure the low threshold and
window period of errored frame
seconds event, no command
resotores the default value.
(optional)
Command
Explanation
Port mode
ethernet-oam remote-failure
no ethernet-oam remote-failure
Enable remote failure detection of
EFM OAM (failure means
critical-event or link-fault event of the
local), no command disables the
function. (optional)