XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
128
5. Enter port-channel configuration mode.
Command
Explanation
Global Mode
interface port-channel
<port-channel-number>
Enter port-channel configuration mode.
6. Set load-balance method for port-group
7. Set the system priority of LACP protocol
no trill field
l3payload field. T
he no command
recovers to be the default
configuration that means all the fields
are configured.
trill tunnel field l2payload [dst-mac]
[egr-rbridge-name][ing-rbridge-name]
[l2-protocol] [src-mac] [vlan]
no trill tunnel field
This command is used to configure
the load-balance enhanced trill tunnel
field. The no command recovers to be
the default configuration that means
all the fields are configured.
trill tunnel field l3payload
no trill tunnel field
This command is used to configure
the load-balance enhanced trill tunnel
l3payload field which matching the trill
field l3payload. T
he no command
recovers to be the default
configuration that means all the fields
are configured.
trill tunnel field outerl2
no trill tunnel field
This command is used to configure
the load-balance enhanced trill tunnel
outer l2 field which matching l2 field.
The no command recovers to be the
default configuration that means all
the fields are configured.
Command
Explanation
Aggregation port configuration mode
load-balance {dsp-ip | dst-mac | dst-src-
ip |
dst-src-mac | enhance-profile | src-ip | src-mac }
Set load-balance for port-group.
Command
Explanation