XGS-5240-Series User Manual

Configuration Guide of XGS-5240-Series
119
9. Configure the optional information-sending attribute of the port
Command
Explanation
Port Configuration Mode
lldp transmit optional tlv [portDesc]
[sysName] [sysDesc] [sysCap]
no lldp transmit optional tlv
Configure the optional
information-sending attribute of the port
as the option value of default values.
10. Configure the size of space to store Remote Table of the port
Command
Explanation
Port Configuration Mode
lldp neighbors max-num < value >
no lldp neighbors max-num
Configure the size of space to store
Remote Table of the port as the
specified value or default value.
11. Configure the type of operation when the Remote Table of the port is full
Command
Explanation
Port Configuration Mode
lldp tooManyNeighbors {discard |
delete}
Configure the type of operation when the
Remote Table of the port is full.
12. Display and debug the relative information of LLDP
Command
Explanation
Admin, Global Mode
show lldp
Display the current LLDP configuration
information.
show lldp interface ethernet <IFNAME>
Display the LLDP configuration
information of the current port.
show lldp traffic
Display the information of all kinds of
counters.
show lldp neighbors interface et
hernet < IFNAME >
Display the information of LLDP
neighbors of the current port.
show debugging lldp
Display all ports with LLDP debug
enabled.
Admin Mode
debug lldp
no debug lldp
Enable or disable the DEBUG switch.