XGS-5240-Series User Manual

Table Of Contents
Configuration Guide of XGS-5240-Series
118
Port Mode
lldp mode (send|receive|both|disable)
Configure the operating state of port
LLDP.
4. Configure the intervals of LLDP updating messages
Command
Explanation
Global Mode
lldp tx-interval <integer>
no lldp tx-interval
Configure the intervals of LLDP updating
messages as the specified value or
default value.
5. Configure the aging time multiplier of LLDP messages
Command
Explanation
Global Mode
lldp msgTxHold <value>
no lldp msgTxHold
Configure the aging time multiplier of
LLDP messages as the specified value or
default value.
6. Configure the sending delay of updating messages
Command
Explanation
Global Mode
lldp transmit delay <seconds>
no lldp transmit delay
Configure the sending delay of updating
messages as the specified value or
default value.
7. Configure the intervals of sending Trap messages
Command
Explanation
Global Mode
lldp notification interval <seconds>
no lldp notification interval
Configure the intervals of sending
Trap messages as the specified value or
default value.
8. Configure to enable the Trap function of the port
Command
Explanation
Port Configuration Mode
lldp trap <enable|disable>
Enable or disable the Trap function of
the port.