User's Manual

Configuration Guide of XGS-5240-Series
99
storm control {unicast | broadcast |
multicast} {kbps <Kbits> | pps <PP
S>}
Enables
the storm control function for
broadcasts, multicasts
and unicasts with
unknown destinations (short for broadcast),
and sets the allowed broadcast packet
number; the no format of this command
disables the broadcast storm control
function.
port-scan-mode {interrupt | poll}
no port-scan-mode
Configure port-scan-mode as interrupt or poll
mode, the no command restores the default
port-scan-mode.
rate-violation <200-2000000> [recover
y <0-86400>]
no rate-violation
Set the max packet reception rate of a port. If
the rate of the received packet violates the
packet reception rate, shut down this port
and configure the recovery time, the default
is 300s. The no command will disable the
rate-violation function of a port.
Global Mode
port-rate-statistics interval <interval -
value>
Configure the interval of port-rate-statistics.
3. Virtual cable test
Command
Explanation
Admin Mode
virtual-cable-test interface (ethernet
|)IFNAME
Test virtual cables of the port.