User's Manual

Configuration Guide of XGS-5240-Series
92
3. Copy the source file to be the destination file
4. Delete the file content
5. Rename the file name
6. Update the config file under the USB letter to the switch
7. Update the bootrom file under the USB letter to the switch
Admin Mode
dir
Show the USB letter information.
Command
Explanation
Admin Mode
copy source destination
Copy the source file to be the destination
file.
Command
Explanation
Admin Mode
delete filename
Delete the file.
Command
Explanation
Admin Mode
rename source destitation
Rename the source file name to be the
destination file name.
Command
Explanation
Admin Mode
copy usb:/startup.cfg startup.cfg
Update the config file under the USB
letter to the switch. T
he reverse
transmission is supported: copy
startup.cfg usb:/startup.cfg
Command
Explanation
Admin Mode
copy usb:/boot.rom boot.rom
Update the bootrom file under the USB
letter to the switch. T
he reverse
transmission is supported: copy boot.rom
usb:/boot.rom