User's Manual

Configuration Guide of XGS-5240-Series
91
Chapter 7 USB Function Configuration
7.1 Introduction
When there is USB device inserted or pulled out, the switch can detect that information of
USB hot inserting and pulling out and the switch will mount or uninstall the USB device.
When there is USB device inserted, the switch will mount the USB file system. It can read,
copy, delete, rename the files in USB, and it can also recover the configuration, download the
files and save the files.
This device supports the flow-passed warning function of the USB. When the actual
electric current exceeds the rated current of the device, the switch will prompt user that the
temperature is too high. And then, there is the danger of burning out the device if the USB is
inserted.
7.2 USB Function Configuration List
1. Mount the USB device and enter in the USB letter
2. Show the USB letter information
3. Copy the source file to be the destination file
4. Delete the file content
5. Rename the file name
6. Update the config file under the USB letter to the switch
7. Update the bootrom file under the USB letter to the switch
8. Update the img file under the USB letter to the switch
9. Create the content
10. Delete the existed content
11. Uninstall the USB device
1. Mount the USB device and enter in the USB letter
2. Show the USB letter information
Command
Explanation
Admin Mode
cd usb:
Enter in the USB letter.
Command
Explanation