User's Manual

Configuration Guide of XGS-5240-Series
87
3. Configure attributes of the cluster in the commander switch
4. Configure attributes of the cluster in the candidate switch
5. Remote cluster network management
cluster commander [<cluster_name>]
no cluster commander
Create or delete a cluster.
cluster member {candidate-sn <candidate-s
n> | mac-address <mac-addr> [id <member-
id> ]}
no cluster member {id <member-id> | mac-
address <mac-addr>}
Add or remove a member switch.
Command
Explanation
Global Mode
cluster auto-add
no cluster auto-add
Enable
or disable adding newly
discovered candidate switch to the
cluster.
cluster member auto-to-user
Change
automatically added
members into manually added ones.
cluster keepalive interval <second>
no cluster keepalive interval
Set the keep-alive interval of the
cluster.
cluster keepalive loss-count <int>
no cluster keepalive loss-count
Set the max number of lost
keep-
alive messages that can be
tolerated in the cluster.
Admin mode
clear cluster nodes [nodes-sn <candidate-s
n-list> | mac-address <mac-addr>]
Clear nodes in the list of candidate
switches maintained by the switch.
Command
Explanation
Global Mode
cluster keepalive interval <second>
no cluster keepalive interval
Set the keep-
alive interval of the
cluster.
cluster keepalive loss-count <int>
no cluster keepalive loss-count
Set the max number of lost
keep-
alive messages that can be
tolerated in the clusters.
Command
Explanation