User's Manual

Configuration Guide of XGS-5240-Series
81
************************
write ok
150 Opening ASCII mode data connection for nos.img (1526037 bytes).
226 Transfer complete.
 If the switch is upgrading system file or system start up file through FTP, the switch must
not be restarted until “close ftp client” or “226 Transfer complete.” is displayed, indicating
upgrade is successful, otherwise the switch may be rendered unable to start. If the
system file and system start up file upgrade through FTP fails, please try to upgrade again
or use the BootROM mode to upgrade.
1.1.1.18.2 TFTP Troubleshooting
When upload/download system file with TFTP protocol, the connectivity of the link must
be ensured, i.e., use the “Ping” command to verify the connectivity between the TFTP client
and server before running the TFTP program. If ping fails, you will need to check for
appropriate troubleshooting information to recover the link connectivity.
 The following is the message displays when files are successfully transferred. Otherwise,
please verify link connectivity and retry “copy” command again.
nos.img file length = 1526021
read file ok
begin to send file, wait...
file transfers complete.
Close tftp client.
 The following is the message displays when files are successfully received. Otherwise,
please verify link connectivity and retry “copy” command again.
begin to receive file, wait...
recv 1526037
************************
write ok
transfer complete
close tftp client.
If the switch is upgrading system file or system start up file through TFTP, the switch must
not be restarted until “close tftp client” is displayed, indicating upgrade is successful, otherwise
the switch may be rendered unable to start. If the system file and system start up file upgrade
through TFTP fails, please try upgrade again or use the BootROM mode to upgrade.