User's Manual

Configuration Guide of XGS-5240-Series
74-12
Port Mode
lacp timeout <long | short>
no lacp timeout
Configure/delete the quick detection.
4. Enable LACP MAD
Command
Explanation
Aggregation Port Mode
vsf mad lacp <enable | disable>
Enable/disable LACP MAD on port-group.
74.2.3 BFD MAD Configuration
BFD MAD configuration task list:
1. Create the vlan used for BFD MAD
2.
Add the port used for BFD MAD into the corresponding vlan
3. Configure IP address for BFD MAD layer3 interface
4. Enable BFD MAD function
1. Create the vlan used for BFD MAD
Command
Explanation
Global Mode
vlan <vlan-id>
no vlan <vlan-id>
Configure/delete vlan.
2. Add the port used for BFD MAD into the corresponding vlan
Command
Explanation
VLAN Configuration Mode
switchport interface ethernet <port-nu
m>
no switchport interface ethernet <por
t-num>
Add the port into vlan or let it out.
3. Configure IP address for BFD MAD layer3 interface
Command
Explanation
Global Mode
Interface vlan <vlan-id>
Enter into the vlan interface configuration mo
de.
Interface Configuration Mode